| Input Voltage |
230V AC (Nominal) |
Input Voltage Range |
170V AC to 270V AC |
| Nominal I/p Frequency |
50 Hz |
I/p Frequency Range |
45 Hz to 55 Hz |
| Output DC Voltage |
As per Customer Requirement |
Output DC Current |
As per Customer Requirement |
| Transient Response |
+ /- 2% ( Overshoot / Undershoot ) 200 usec (Recovery Time) |
Output Line & Load Regulation |
+/- 1% |
| Output Ripple & Noise |
+/- 0.1% + |
Output DC Voltage Adjustment Range |
+/- 10% |
| Protections |
I/p High cut off I/p Low cut offDC Over VoltageDC Under VoltageO/p over loadO/p short circuit |
Indications |
Over TempMains ONDC OKI/p HighI/p LowDC OverDC UnderO/p Over load |
| O/p Turn on Time |
As per requirement |
O/p Hold up Time |
As per requirement |
| Insulation Resistance |
I/p to O/pI/p to Earth -- > 10mins. at 500VDCO/p to Earth |
Breakdown Test |
I/p to O/p -- For 1 mins at 1200V ACI/p to Earth |
| Cooling Facility |
Forced Air Cooling / Natural Air Cooling |
Cabinet Size |
As per customer requirement |
| Inverter Efficiency |
> 70% |
Overall Efficiency |
> 60% |
| EMI /EMC Test |
As per customer requirement |
Temp Test |
Dry Test, Cold Test, Humidity Test |
| Edundant Unit Facility (N + 1) |
Load sharing Type |
Technology |
Low frequency SCR based |
| Devices |
SCR, Diode |
Bump Test |
Optional |
| Vibration Test |
Optional |
Shock Test |
Optional |
| I/p Noise Test |
Optional |
Water proof Test |
Optional |