Send an Enquiry MW-3100 Rating: 7.5 KVA - 50 KVA

Features of 3 Phase Input - 1 Phase Output:   True Sine wave   Double Conversion ONLINE UPS   Input near unity Power Factor   Input Current Harmonic Suppression   Sleek and Low Foot print   High Frequency PWM With IGBT   Wide Input Voltage Range   High Efficiency Design   SNMP & RS232 Compatible(Optional)   Can be paralleled upto Three times   Parallel Redundant (Optional)       Enhanced Protection Against Lightening Surges and Other Disturbances     Specifications of 3 Phase Input - 1 Phase Output : Parameters(7.5 KVA - 50 KVA) Input Voltage Range : 415V +20% -30% Frequency : 45Hz-60Hz Output Voltage : 230V AC + / - 1% Frequency : 50Hz + / - 0.1% Transient Response : +/- 5%,recovers within 5mSec (100% load variation) Waveform : Pure Sinewave Overload Capacity : 120% load 30 seconds Crest Ratio : 3:1 Technology Design : PWM,Double conversion Cooling : Forced Air Compatibility : All gensets Operating Temperature : 10 C to 50 C / 0 to 95 % RH Devices : IGBT Battery Voltage : 240V / 324V / 360V / 384V Charger : CCCV, Float / Boost / Extended Efficiency  Inverter : > 90% Transfer time AC fault : Zero Protection Battery : Battery Under Voltage Overload : Output Overload Short Circuit : Current Limited and cut-off and fuse and breaker UPS Fault : Bypass EMI / EMC : EN50091-2, CE Approved MTBF : > 1,00,000 hours Environment Relative Humidity : 20-90% non-condensing Audible noise : < 45 dB at 1mt length ( above ambient ) Optional Shut Down Software Load monitoring Battery Monitoring Remote Control SNMP LCD/LED panel Applications of 3 Phase Input - 1 Phase Output :   Load sharing   Critical applications   Single phase load of servers   Medical equipment   Send an Enquiry