Send an Enquiry HW-3300 Rating: 7.5 KVA - 150 KVA

Features of 3 Phase Input - 3 Phase Output :   IGBT based PWM technology.   True sinewave double conversion on-line type.   Heavy duty UPS.   Energy saving function.   Galvanic isolation.   Over load protection.   Short circuit protection.   Lightning and Surge protection.   Total Microprocessor control.   Cold start function.   Built in RS 232 port for remote access.     Optional of Features 3 Phase Input - 3 Phase Output :   Static Bypass facility.   Parallel redundant configuration.   Input power factor correction.   SNMP compatibility.   LCD display.     Specifications of 3 Phase Input - 3 Phase Output : Parameters (7.5 KVA - 150 KVA) Input Voltage Range : 415V +20% -30% Frequency : 45Hz-60Hz Output Voltage : 230V AC +/- 1% Frequency : 50Hz +/- 0.1% Transient Response : +/- 5%,recovers within 5mSec (100% load variation) Waveform : Pure Sinewave Overload Capacity : 120% load 30 seconds Crest Ratio : 3:1 Technology Design : PWM, Double conversion Cooling : Forced Air Compatibility : All gensets Operating Temperature : 10 C to 50 C / 0 to 95 % RH Devices : IGBT Battery Voltage : 240V/324V/360V/384V Charger : CCCV, Float/Boost/Extended Efficiency  Inverter : > 90% Transfer time AC fault : Zero Protection Battery : Battery Under Voltage Overload : Output Overload Short Circuit : Current Limited and cut-off and fuse and breaker UPS Fault : Bypass EMI / EMC : EN50091-2, CE Approved MTBF : > 1,00,000 hours Environment Relative Humidity : 20-90% non-condensing Audible noise : < 45 dB at 1mt length ( above ambient ) Optional Shut Down Software Load monitoring Battery Monitoring Remote Control SNMP LCD/LED panel Applications of 3 Phase Input - 3 Phase Output :   Data Centers   Large EDP Centers   Broadcasting & Telecom Equipments   Hospitals   Educational Institutes   Process Motors   Embroidery Systems       Send an Enquiry