Are you looking out for a solar grid-tie inverter, but don’t know how to choose the best one?
Well then, Enertech, the leading solar charge controller and battery charger suppliers, brings this blog to you, serving you as a step by step guide.
It will take you through all the elements you must consider before buying a solar grid-tie inverter.
The Criticality of Solar Grid-tie Inverters
A solar grid-tie inverter is connected to the local utility grid. It sends the power the solar array generates back to the local power grid.
A solar grid-tie inverter takes direct current generated out of the solar photovoltaic panels (PV) panels. It then transforms it into alternating current (AC), which is the usable form of energy. The inverter sends the AC to the local power grid, which then powers your home.
In the above mechanism, it is necessary to connect the solar energy system to the local power grid through the electricity meter. Doing so will earn you credit that the local electricity board will pay you for generating some energy.
A solar grid-tie inverter, therefore, is a critical device. Hence, you must be careful while buying it.
5 Factors to Consider while Buying a Solar Grid-tie Inverter
- IP Rating of the Inverter
The IP rating is the Ingress Protection Rating of the inverter.
Inverters are subject to harsh natural elements such as water, dirt, dust, high temperatures, low temperatures, fluctuating voltages, etc.
The IP rating of the inverter signifies how resistant your inverter is to all the above factors.
It is a two-digit number, wherein each increasing digit denotes the level of protection.
- Output Waveform
Based on the circuit design, inverters generate outputs with various waveforms like square wave, sine wave, modified sine wave, etc.
However, an inverter producing a true sine wave must form your choice.
Why? That’s because a true sine wave is more energy-efficient while powering inductive loads, as compared to other waveforms that use 20% more energy.
Excessive utilization of energy may result in, and it may affect the working of your appliances in the long run.
- Efficiency of the Inverter
An inverter’s efficiency is all about the power it takes from the solar panels, and converts into usable AC power. An efficient inverter reduces the loss of energy that usually happens while receiving DC from the solar panels.
An efficiency of 50% indicates that the inverter is using very less amount of power. On the other hand, an efficiency of 90% denotes maximum utilization of energy, and which is considered to be the inverter’s rated output.
Most of the solar grid-tie inverter manufacturers offer a peak efficiency value. Peak efficiency value is the highest efficiency that the inverter can achieve.
- Power Consumption
Power consumption constitutes an essential element of the solar inverter you buy.
The efficiency of the charging segment determines the power consumption of your solar inverter. An inefficient charging element will lead to wastage of electricity, even after fully charging the battery.
- Battery Backup Duration
Duration of the battery backup is an important consideration. It determines for how long the inverter will serve when you start using it. Ensure that you check the battery backup before making a choice.
- Choose the Best Vendor
There are many solar inverter, solar charge controller and battery charger suppliers out there in the market. Hence, choosing the best may turn a challenge.
So, while choosing the best vendor, ensure that the vendor services right from selling the product to installing, and further maintaining it.
Besides, it is necessary that the vendor offers after-sales service though a technical team to resolve routine concerns if any. Elements such as warranty as well matter a lot.
Summary: Enertech has been operating for over 25 years now. It is among the leading manufacturers of solar grid-tie inverters in India. Besides, the company offers other products such as solar charge controller. It is also one of the best battery charge suppliers in India.
The company uses state-of-the-art technology and employs the best resources to innovate futuristic products.
For more information, or sales enquiries call at +91-9370659050.
With an experience of over 25 years in industrial products, Enertech has been delivering excellence through a range of products, including hybrid solar inverter, string monitoring system, air-cooled voltage stabilizer, battery management system, and many others.
This blog will highlight the features of the above products manufactured at Enertech.
- Hybrid Solar Inverter
Enertech’s hybrid solar inverter is designed to cater to industrial and domestic energy needs. It comes with a 3 phase grid export and battery backup feature.
Here are some of the features of Enertech’s hybrid solar inverter.
- Range 10kW to 100kW
- Unity power factor for grid changing
- Less than 20 minutes of changeover time
- Paralleling compatibility
- Vector Modulated Inverter Control
- Multiple DSP control operation
- Auto fault reset for non-critical faults
- Communication port: RS232
- Fault logs: 9 recent faults, and many others
2. Solar UPS
Enertech’s Solar UPS comes with an inbuilt MPPT based charger. Consumers typically use it for an uninterrupted power supply. This is because the output load is maintained constantly with a zero change over time.
Here’s what the Enertech’s solar UPS offer.
- DSP based technology
- Inbuilt galvanic isolation transformer
- Pure sine wave output with low THD
- An optional advanced remote monitoring software
- Emergency battery backup buffer
- LCD display to view the metering input and output parameters.
- MPPT (Maximum Power Point Tracking) design
- DC reverse polarity and battery deep discharge protection, etc.
3. Air Cooled Voltage Stabilizer
Enertech’s Servo controlled air-cooled voltage stabilizer helps continually monitor output voltage. It also helps control variations in the input voltage through motor movements.
The products offer the following features.
- A quick response of 10 seconds.
- A user friendly dashboard, coupled up with 97% efficiency
- It can correct rugged, smooth, as well as high speed voltage
- The stabilizer is compact in size
- The stabilizer offer short circuit, phase reversal, and overload protection
- Micro-controller based design
- Equipped with a manual adjustment of voltage through the use of potentiometer, and high regulation of up to +/- 0.5%.
4. String Monitoring System
The string monitoring system manufactured at Enertech offers the following features.
- A flexible system design
- Low maintenance
- Ease of use
- The system displays panel information, and error if any.
- Saves time and cost through a simplified commissioning process
- RS232 and RS485 communication port
- Display solar system performance
- Offers instant solar information
- Notifies the time for maintenance
Pune’s growing industrial area and demands gave rise to a lot of companies in the late 1980s.
Enertech was established out of the industrial quest for quality products, and unmatched service.
It was found in the year 1989, and over the years, has grown into one of the leading companies offering a wide range of industrial products.
Besides the above, Enertech offers a comprehensive hi-tech battery management system
The company believes in excellence through all of its products and services. It employs a team of qualified professionals who innovate to help companies deliver results.
For more information on Enertech’s products, get in touch with Enertech at +91-9370659050.
When asked about the role of a charge controller, an expert associated with a leading company that fabricates servo stabilizer Pune described the device as an essential part of a solar power harnessing system.
It is instrumental in the proper charging and discharging of the batteries, thus assisting them to remain operational for more extended periods.
But how to choose one that is suitable for one’s needs?
Well, one would need to keep in mind a few things when they are choosing a charge controller.
It is time to take a look into some of them in the following sections:
Be careful while choosing the voltage configuration
In the opinion of experts associated with leading servo stabilizer manufacturers in India like Enertech UPS Pvt. Ltd., it is best to select a charge controller that is capable of handling the voltage output of the system.
Charge controllers are made available by leading manufacturers in the following configurations:
- 24V and
If one has a solar power harnessing system that generates 12 volts of peak power output, then they would need to invest in a solar charge controller that can handle 12 volts.
On a lighter note, one can always go for a charge controller that can handle the maximum power output i.e., 48V, in case they have plans to upgrade their solar power harnessing system in the near future.
An ideal solar charge controller Mumbai should have the following features:
- It should come with an advanced microprocessor control unit that can automatically detect voltage and act accordingly by adjusting its internal workings in real-time.
- It should come with a buck regulator that would allow it to be used in solar power harnessing systems with a full power output range.
- It should be able to protect the system in case the polarity is reversed due to a fault in the system.
- It should be able to protect the battery unit(s) from both overcharging as well as discharging prematurely.
Type of the solar charge controller
Charge controllers are primarily of two types:
- MPPT (Maximum Power Point Tracking)
- PWM (Pulse Width Modulation)
Among the two types mentioned above, it is best that one chooses the MPPT type charge controller since PWM type controllers don’t even come close to its counterpart in terms of efficiency.
Size of the solar charge controller
Choosing the right size of the servo stabilizer is very important and pretty comfortable at the same time! It is best to choose one that is
large enough to work with the amount of current and power a solar power harnessing system is producing at any given point in time.
If one is on the hunt for the best quality solar charge controller, then they should choose a solar charge controller from the house of Enertech UPS Pvt. Ltd. They are one of the leading servo stabilizer manufacturers in India.
They have been associated with the fabrication and research of products falling under the category of solar power engineering for the past 25 years. They are pioneers when it comes to offering efficient and active solar energy solutions.
For further details, please visit their official website: https://www.enertechups.com/.
” Happy Engineers Day ! ” Connect with ENERTECH #Manufacturer #Supplier #SolarHybridPCU #MPPTChargeController #ServoStabilizer #AJB #ACDB #DCDB #GridTiedInverter
Ganpati Bappa Morya !…. Mangal Murti Morya !! #SolarHybridInverter #ServoStabilizer #MPPTCharger #ACDB #DCDB #AJB #BattryCharger #Manufacturer #Supplier #REI2018 #MakeInIndia #GoSolar for more info visit www.enertechups.com
“Happy Rakshabandhan” #solarInverter #GridTiedInverter #MPPTCharger #SolarBatteryCharger #HybridInverter
Solar has been increasingly embraced as a way of combating rising electricity costs and alternate to fulfill energy demands. Both government and publics are taking initiatives by going solar to improve their bottom line while doing something that’s good for the environment.
Hospitals relies on electricity for crucial loads such as medical equipments and other essential loads.
Solar PCUs designed by Enertech UPS has been successful in meeting energy demands and saving electricity costs of users of various applications in Hospitals, Government Offices, Petrol Pumps, Educational Organizations etc.
At Dr. Pullu Clinic hospital, Arunachal Pradesh, has been successful in saving electricity cost and meeting energy demands.
What made Dr. Pullu Clinic to go solar
Being located in remote geographical location, Dr. Pullu Clinic was experiencing poor supply of electricity and top of that voltage variations. Dr. Pullu contacted our dealer, West Bengal for a solar solution. Our dealer, who has made several solar plant installations using our Solar PCUs, recommended our product as a solution.
Dr. Pullu Clinic was explained on our PCU functinality, FAB analysis and how to make use of features available in PCU as per requirement.
After studying the site conditions and load usage pattern, a proper solution was given to Dr. Pullu Clinic and complete installation was made in a short while.
Now, Dr. Pullu is very much happy with the PCU performance and over all plant performance. And consistantly saving the electricity cost and became more energy independent.
This is how a hospital in one of the remote locations of Arunachal Pradesh went SOLAR!!